Miyakonojo Daikyu (Bamboo Longbows)

Miyakonojo Daikyu (Bamboo Longbows of Miyakonojo)

Miyakonojo Daikyu (Bamboo Longbows) 1

Miyakonojo Daikyu are bamboo bows made in Miyakonojo City and in Mimata Town, Kitamorokata District, Miyazaki Prefecture. They are made from Miyakonojo madake bamboo and haze wood (Japanese wax tree), and a single bowyer (yumishi) finishes each bow almost entirely by hand through more than 200 steps. The production method is said to have been established in the early Edo period, and in 1994 (Heisei 6) the bows were designated a Traditional Craft Designated by the Minister of Economy, Trade and Industry. Miyakonojo City describes itself as the production area that makes most of Japan's bamboo bows. Figures for its exact share vary by source, with some saying about 90 percent and others 80 percent. In 2020 (Reiwa 2) they became the first traditional craft in Miyazaki Prefecture to be registered as a regional collective trademark. The rights holder is the Miyakonojo Bow Manufacturing Cooperative (都城弓製造業協同組合). It is said to take more than 10 years to become a fully fledged bowyer, and bowyers who are certified traditional craftspeople (Dento Kogeishi) have workshops in Miyakonojo City and Mimata Town.

Origin

According to the Japan Patent Office's introduction of regional collective trademarks, the Miyakonojo longbow descends from the Satsuma bow, and its production method is said to have been established in the early Edo period. This is reportedly recorded in 'Shonai Chirishi' (庄内地理志), a topography compiled between the Kansei and Bunsei eras by the record keepers of the Miyakonojo branch of the Shimazu clan. The Miyazaki Prefecture booklet 'Hinata no Takumi' says its origins are believed to go back as far as the Heian period. In Satsuma, martial arts were encouraged, and the making of weapons and armor flourished.

History

The Miyakonojo Bow Manufacturing Cooperative introduces 楠見蔵吉 (Kusumi Kurakichi) as 'the founder of bow making in Miyakonojo.' The Japan National Tourism Organization (JNTO) website explains that in the Meiji era, the bowyer Kusumi came to Miyakonojo in search of materials and trained many apprentices. The bows were designated by Miyazaki Prefecture in 1984 (Showa 59) and as a national traditional craft in April 1994. A 2022 report by UMK TV Miyazaki said that the number of workshops had fallen from about 30 at the peak to seven or eight.

Features

According to 'Hinata no Takumi,' four to seven strips of fire-treated bamboo are lined up and wrapped in haze wood to form the bow core, which is then sandwiched between bow bamboo on both sides and glued together to form the basic bow. About 100 bamboo wedges are driven in to give it its curve, and the string is attached to finish it. A single craftsperson does everything by hand, from cutting the bamboo to wrapping the rattan. In recent years, bamboo bows with carbon built into the core, as well as nibe-yumi bows glued with nibe, an animal glue made from deer hide, have also been made.

Techniques

Making susutake (smoked bamboo)

According to 'Hinata no Takumi,' bamboo is placed in a muro (chamber) and smoked to make susutake. Smoking and washing are repeated, and the bamboo is moved to different places while the craftsperson checks how the color is developing. Bamboo with a deep color on its surface is used as material for the outer side of the bow.

Uchikomi (driving in the wedges)

The core is sandwiched between bow bamboo, and about 100 bamboo wedges are driven in one by one to tighten it. This step gives the bow a semicircular curve according to how tightly it is clamped, and it sets the foundation of the bow's shape. How the wedges are driven in has not been quantified and is said to depend largely on the bowyer's experience and feel.

Arabari (rough stringing)

After the wedges are removed, the bow is shaped on a stringing stand, and a string is attached so the form can be adjusted while checking the shape of the upper and lower limbs. 'Hinata no Takumi' says the quality of the bow is decided in this rough stringing. Reports say that because the bow's resilience is so strong, the stringing is done by two people.

Materials Used

Madake bambooHaze wood (Japanese wax tree)Susutake (smoked bamboo)RattanNibe (animal glue)Maple and carbon (core material)

Production Process

  1. 1

    Selecting and drying the bamboo

    Straight madake bamboo with evenly spaced nodes and no flaws is selected. According to a report by UMK TV Miyazaki, the bamboo is cut in November and December and dried naturally for three to four months.

  2. 2

    Fire treatment and shaving

    The bamboo is heated to remove oil and dirt from its surface, making it lighter and less prone to insects. It is shaved evenly so that it becomes gradually thinner from the grip toward both ends.

  3. 3

    Gluing

    The bow core is sandwiched between bow bamboo, and end pieces called hitaigi (額木) and sekiita (関板) are attached to the upper and lower ends and glued. Besides haze wood, some workshops use a core combining maple and carbon.

  4. 4

    Uchikomi (driving in the wedges)

    About 100 bamboo wedges are driven in one by one, giving the bow a semicircular curve as it is tightened. Clamping the core while it is sandwiched between bamboo creates the foundation of the curve of the whole bow.

  5. 5

    Stringing and finishing

    The wedges are removed, the bow is shaped on a stringing stand, and a string is attached to adjust its form. After further stringing and adjustment, rattan is wrapped around the grip to finish it. Reports say it takes about one year to complete a single bow.

Main Production Areas
  • Miyakonojo City, Miyazaki Prefecture
  • Mimata Town, Kitamorokata District, Miyazaki Prefecture

Artisans & Workshops

横山黎明弓製作所

A workshop at 8-14 Tsumagaoka-cho, Miyakonojo City. UMK TV Miyazaki reports that it was founded in 1917, and the certified traditional craftsperson 横山黎明 and his eldest son 慶太郎 make the bows. 'Hinata no Takumi' introduces its development of bamboo bows with built-in carbon and its activities passing on Miyakonojo Daikyu to schoolchildren.

Official site →

楠見蔵吉弓製作所

A workshop at 2016 Hayasuzu-cho, Miyakonojo City (inside the woodworking industrial park). According to the cooperative's introduction, it is the seventh generation counting from the first, 堀江善兵衛, and the current head, 楠見純寛, was born in 1965. He is a certified traditional craftsperson who apprenticed himself to his father, 純教, in 1987.

Official site →

南崎寿宝大弓製作所

A workshop at 1524 Hayasuzu-cho, Miyakonojo City. It is listed as a manufacturer in the member shop information of the All Japan Kyudo Equipment Association (全日本弓道具協会). 南﨑寿宝 is named as one of the four bowyers who are certified traditional craftspeople in the introduction of regional collective trademarks by the National Center for Industrial Property Information and Training (INPIT).

Official site →

小倉紫峯大弓製作所

A workshop at 3987-2 Kabayama, Mimata Town, Kitamorokata District. According to the cooperative's introduction, 小倉哲朗 apprenticed himself to the previous head, 小倉紫峯, in 1985. He reportedly cuts more than 1,000 bamboo stalks and dries them for two years. Mimata Town introduces bows whose core is made of three to five layers of composite material.

Official site →

How to Buy

Ordering from bow workshops
Bows are ordered from each workshop according to the desired draw weight and length. The online shop of 横山黎明弓製作所 listed a standard-length bamboo bow with a haze wood core at 120,000 yen and one with a carbon-reinforced core at 145,000 yen. Both were sold out when checked, and prices may change.Where to buy →PR
Decorative bows (hamayumi)
Besides bamboo bows for competition, the cooperative introduces decorative hamayumi (錦弓 and 登弓) and Miyakonojo Daikyu key chains. The online shop of 横山黎明弓製作所 listed a 登弓 hamayumi at 95,000 yen.Where to buy →PR
Miyakonojo City furusato nozei
Bamboo bows from each workshop have been registered as return gifts for Miyakonojo City's furusato nozei (hometown tax donation). Furusato Choice listed a bamboo bow of 焦竹 (scorched bamboo) with a haze wood core by 横山黎明弓製作所 for a donation of 414,000 yen, but the listing had ended when checked in November 2026. Availability varies over time.

FAQ

Q. What share of Japan's bamboo bows does Miyakonojo make?

A. The figures differ by source. Miyazaki Prefecture's 'Hinata no Takumi' says about 90 percent of Japan's bamboo bows, while the Japan National Tourism Organization website says 80 percent. Miyakonojo City describes it as 'most of Japan's bamboo bows' and 'the largest production volume in Japan.'

Q. How many bowyers are certified traditional craftspeople?

A. According to the cooperative and the National Center for Industrial Property Information and Training, there are four: 小倉紫峯, 楠見蔵吉, 南﨑寿宝 and 横山黎明. A Miyakonojo City page says five, so the number differs depending on the time of reference.

Q. How long can a bamboo bow be used?

A. A 2022 report by UMK TV Miyazaki says that with proper care it can be used for 80 years. Because it is made of bamboo and natural core material, it is affected by humidity and how it is stored. Some workshops also accept bow correction (reshaping).

#Miyakonojo Daikyu#Bamboo bows#Japanese bow (wakyu)#Kyudo#Martial arts equipment#Miyakonojo City#Mimata Town#Traditional crafts