Higo Zogan (Gold and Silver Inlay on Iron)

Higo Zogan (Gold and Silver Inlay on Iron of Kumamoto)

Higo Zogan (Gold and Silver Inlay on Iron) 1

Higo zogan is a metalwork craft of Kumamoto in which gold and silver are set into an iron base to create patterns. It is said to have begun about 400 years ago, in the early Edo period, when gunsmiths decorated gun barrels and sword guards (tsuba). Because Hosokawa Tadaoki employed master craftsmen and encouraged their skills, it became known throughout Japan as 'Higo kinko' (Higo metalwork). When the Sword Abolishment Edict reduced demand for sword fittings, the techniques were carried on in accessories and other items. In March 2003 (Heisei 15) it was designated a Traditional Craft by the Minister of Economy, Trade and Industry, and its officially designated name is written '肥後象がん.' Today most pieces are made with the nunome zogan (cloth-texture inlay) technique, centering on stationery and accessories in which gold and silver stand out against black iron. It is made in Kumamoto City, Nankan Town and Yamato Town, and at the long-established workshop 光助 in Shinmachi, Kumamoto City, you can also try inlay work.

Origin

According to the Kumamoto Prefectural Traditional Crafts Center, it is said to have begun about 400 years ago, in the early Edo period, when gunsmiths applied inlay to gun barrels and sword guards. Materials from Kumamoto City explain that it was started by gunsmiths who served the domain lord. The Japan Tourism Agency's multilingual commentary states that it spread under Hirata Hikozo, a smith whom Hosokawa Tadaoki brought from Omi Province, so accounts vary.

History

Hosokawa Tadaoki employed master craftsmen to make sword fittings and encouraged their skills. Edo-period metalworkers include the Hayashi family of Hayashi Matashichi, said to be the founder, as well as the Nishigaki, Hirata and Shimizu families and, at the end of the Edo period, the Kamiyoshi family. When demand fell with the Sword Abolishment Edict, the techniques were put to use in accessories. In the Showa era, Yonemitsu Tahei, Tanabe Tsuneo and others trained successors.

Features

According to the Kumamoto Prefectural Traditional Crafts Center, its greatest characteristic is that black rust is deliberately brought out on the iron. This iron rust seals the iron off from the air and acts as a rust preventive. In nunome zogan, gold and silver are hammered into fine grooves cut into the iron base, and fine patterns are also added to their surface by kebori (fine-line engraving). The appearance of gold and silver set into a black ground is described as having a dignified weight and elegance that evokes samurai culture.

Techniques

Nunome zogan (cloth-texture inlay)

Using a chisel called a tagane, the craftsperson cuts notches into the iron base where the inlay will go, four times in total: vertically, horizontally and in two diagonal directions. Gold or silver sheet or wire is hammered into these cloth-like grooves and fixed in place. Most Higo zogan today is made with this technique.

Bringing out rust and rust-proofing

A rust solution is applied with a cloth and the piece is heated over a fire, bringing out rust on the iron base. This solution is said to be 'the most secret of secrets.' The piece is then boiled in a tea solution, and the action of the tannin forms black iron rust on the surface, which prevents the iron from oxidizing.

Materials Used

Iron (base iron)GoldSilverTea solution (for rust-proofing)

Production Process

  1. 1

    Polishing the base and drawing the design

    A small amount of water is placed on the surface of the base iron, and rust and dirt are removed completely with sandpaper. After polishing, the design is drawn. A design drawn on washi (Japanese paper) is transferred directly onto the base iron with a brush.

  2. 2

    Cutting the cloth texture

    Notches are cut with a tagane where the inlay will be applied. The direction is changed four times in total, vertically, horizontally and in two diagonal directions, to create a cloth-like texture.

  3. 3

    Hammering in and tightening

    Gold or silver sheet or wire is hammered in with a deer antler, following the design. The surface is tapped firm with a small hammer, and unneeded notches are polished away with a tool called a kisaki.

  4. 4

    Kebori (fine-line engraving)

    The surface of the gold and silver is lightly ground with magnolia charcoal (hozumi) and burnished with a spatula, and then fine patterns are engraved. This engraving is called kebori.

  5. 5

    Bringing out rust and rust-proofing

    Applying the rust solution and heating the piece over a fire is repeated. The piece is then immersed and boiled in a tea solution; through a chemical change caused by the tannin, black iron rust appears on the iron base and prevents oxidation.

  6. 6

    Baking on and finishing

    Oil is applied and baked on about three times. Finally, the iron rust is rubbed with a brush, the excess rust on the surface is removed, and the piece is wiped clean to complete it.

Main Production Areas
  • Kumamoto City
  • Nankan Town
  • Yamato Town

Artisans & Workshops

肥後象嵌 光助

A workshop in Shinmachi, Chuo Ward, Kumamoto City, described as a long-established business founded in 1874 (Meiji 7). The artisan 大住裕司 works under the art name 光助. At the 2016 G7 Ise-Shima Summit, fountain pens decorated with inlay were used as gifts for the leaders.

Official site →

河口知明(雅号:光秋)

An artisan in Kumamoto City who became a pupil of Tanabe Tsuneo, a holder of an Important Intangible Cultural Property of the prefecture. According to materials from the Kyushu Bureau of Economy, Trade and Industry, he continues to hold classes and demonstrations at the Kumamoto Prefectural Traditional Crafts Center and elsewhere, and also devotes effort to training the next generation.

Official site →

坊田透

He is named as a certified Traditional Craftsman of Higo zogan in materials from the Kyushu Bureau of Economy, Trade and Industry. In archive footage from the Kumamoto Prefectural Traditional Crafts Center, he is introduced as a maker demonstrating the production process. Details of his workshop could not be confirmed.

Official site →

How to Buy

肥後象嵌 光助 (Shinmachi, Kumamoto City)
You can buy pieces at the shop attached to the workshop. According to listings on Rurubu, pendants start at 5,500 yen and mobile phone straps at 8,800 yen. Prices are subject to change. Its business status after the July 2026 Kumamoto earthquake could not be confirmed, so please check before visiting.Where to buy →PR
Kumamoto Prefectural Traditional Crafts Center '工芸ショップ匠' (Kogei Shop Takumi)
A museum shop on the first floor of the center at 3-35 Chibajo-machi, Chuo Ward, Kumamoto City, carrying crafts from across the prefecture. The center reopened in March 2026 after renovation work. Please check the stock of Higo zogan in advance.Where to buy →PR

Hands-on Experiences

肥後象嵌 光助

熊本県熊本市中央区新町3-2-1

You choose a design such as Kumamon or Kumamoto Castle and hammer in gold and silver under a craftsperson's guidance. It takes about one hour. According to listings, it costs 4,000 yen per person plus 770 yen for shipping, and reservations are required by the previous day. The finished piece is delivered two to three weeks later. Prices are subject to change.

View details →

FAQ

Q. Are '肥後象嵌' and '肥後象がん' different things?

A. They refer to the same craft. According to the Kumamoto Prefectural Traditional Crafts Center, it is written as '象嵌,' '象眼' or '象がん,' and the correct notation for the national designation is '肥後象がん.' Kanji may be used in the names of works and techniques.

Q. Why is rust brought out on the iron?

A. According to the Kumamoto Prefectural Traditional Crafts Center, deliberately bringing out iron rust seals the iron off from the air and provides a rust-preventive effect. The black rust made by boiling in a tea solution also forms the black ground that sets off the gold and silver.

#Higo zogan#肥後象がん#Nunome zogan#Metalwork#Hosokawa clan#Kumamoto City#Inlay workshop#Traditional Craft Designated by the Minister of Economy, Trade and Industry